BOSCH GDX18V-1800CN Cordless Impact Driver Overview

BOSCH IMPACT DRIVER GDX18V-1800CN is a hybrid impact driver/wrench. With a two-in-one bit/socket drive that has a 1/4 In. Quick-change hex shank holder with power groove for bits and a 1/2 In. Square drive for sockets, the Bosch Freak Two-in-One 1/4 In. and 1/2 In. Bit/Socket Impact Driver provides results. 

The Bosch hammer-and-anvil combination provides maximum impact energy and up to 0-4,200 hits per minute. In contrast, the impact driver’s efficient, strong EC Brushless cordless motor delivers up to 1,800 In.-Lbs. of torque. The variable-speed trigger ensures that the driving speed is correct.

The driver incorporates Bluetooth connectivity and an LED light system to illuminate the work area, and an optional Connectivity Tool Module for customizing tool settings on a linked device.

BOSCH GDX18V-1800CN Technical Details

Manufacturer‎Bosch
Part Number‎GDX18V-1800CN
Item Weight‎2.6 pounds
Product Dimensions‎5.8 x 3 x 8.2 inches
Item model number‎GDX18V-1800CN
Power Source‎Battery Powered
Voltage‎18 Volts
Torque‎1800 Inch Pounds
Item Package Quantity‎1
Number Of Pieces‎1
Measurement System‎Metric
Included Components‎(1) 4x Bit Holder, (4) Bits, (1) GDX18V-1800C 18V Two-in-One 1/4 In. and 1/2 In. Bit/Socket Impact Driver, (1) Belt Clip
Batteries Included?‎No
Batteries Required?‎Yes
Pros
  • It has high torque and light load speed
  • Light-weighted and smaller head
  • Under load, it’s quieter.
  • If you want to install the Bosch Connected module, it’s ready to go.
  • Hybrid hex/square drive with socket
  • New Connected-ready hammer drills have come with combo sets.
  • Electronic battery and motor protection
Cons
  • Changes from a tri-beam LED light to a single-beam LED light.
  • They are getting slower in average load times.

Conclusion

When using a 1/4′′ hex to 1/2′′ square drive adapter with an impact driver or a 1/2′′ square drive to 1/4′′ hex bit holder with an impact wrench is always an option, it isn’t always the best option. Both chuck varieties are right there on the tool with this tool. Anyone who has ever misplaced or lost bit holders or socket adapters will be grateful for this.

There is somewhat less peak torque than the brushless model, and this is a single-speed tool, whereas the brushless version offers three speed and torque settings.

Whether you go by MSRP or Amazon’s street price, the bare tool costs $30-40 less than the brushless version. The cost of the kit is $20 cheaper.

TEKTON 1/2 Inch Drive x 36 mm 6-Point Impact Socket | SID22136

Point Impact Socket

Hole Cutter Kit, 9 Pc

Hole Cutter Kit, 9 Pc

Drill/Tap/Countersink Set, Sae, 6 Pc

Drill/Tap/
Countersink Set

FAQ

How much torque does the Bosch freak have?

The new Bosch Brushless Connected-Ready Freak Impact Driver has 1800 in-lbs of torque, according to the specs.

Is Bosch freak brushless?

Yes, it is. Bosch Freak 18-Volt 1/2-in Brushless Cordless Impact Driver with Variable Speed Bosch Freak 18-Volt 1/2-in Brushless Cordless Impact Driver with Variable Speed Bosch Freak 18- (2-Batteries Included)

Write A Comment